Tweet
Hi Hall
These files convert demos of any version to the latest version of the F301 BootLoader. After using the file corresponding to your version, your demo will display "fail", you must use the USB port to update your demos to the latest version of the F303 software.
STEP BY STEP PROCEDURE
1- Put on the usb key the file .kuf of conversion of the boot corresponding to your demo (B1xToF301 or F2x1ToF301 ... etc)
2- You inject it to your demo normally through the menu
3- After the reboot, your demo will display "FAIL" - NO PANIC
4- Put the file fw8_upd8.usb (MainSoftware F303 AlgériaOnly) on the root of the usb
5- Turn off the demo by the back button
6- Press the volume down key
7- Turn on the demo, it displays USB and the update starts
8- Do not touch anything until END
9- Switch off and on the demo
At the end of the operation, all the demos will have the Boot F301 and the MainSoftware F303
Link:
These files convert demos of any version to the latest version of the F301 BootLoader. After using the file corresponding to your version, your demo will display "fail", you must use the USB port to update your demos to the latest version of the F303 software.
STEP BY STEP PROCEDURE
1- Put on the usb key the file .kuf of conversion of the boot corresponding to your demo (B1xToF301 or F2x1ToF301 ... etc)
2- You inject it to your demo normally through the menu
3- After the reboot, your demo will display "FAIL" - NO PANIC
4- Put the file fw8_upd8.usb (MainSoftware F303 AlgériaOnly) on the root of the usb
5- Turn off the demo by the back button
6- Press the volume down key
7- Turn on the demo, it displays USB and the update starts
8- Do not touch anything until END
9- Switch off and on the demo
At the end of the operation, all the demos will have the Boot F301 and the MainSoftware F303
Link:
