Oscam Compiled RuBeNi All Patch!!

[RuBeN]

chiudo qui pe evitare a dire ce questa patch o ce altra.

allora sono tutte full e ultime patch.

se ci sono problemi aprite un altro post in forum.

qui solo download
le patch se non funzionano o creano danni io non sono responsabile.
in tutto io solo li ho compilati

Unix starttime: 1377888555
Starttime:      30.08.2013 20:49:15
Version:        oscam-1.20-modded_svn-r261

Web interface support:         yes
Touch interface support:       yes
SSL support:                   no
DVB API support:               yes
DVB API with AZBOX support:    no
DVB API with MCA support:      no
DVB API with COOLAPI support:  no
DVB API with STAPI support:    no
Anti-cascading support:        yes
Irdeto guessing:               yes
Debug mode:                    yes
Monitor:                       yes
Loadbalancing support:         yes
CW Cycle Check support:        yes
LCD support:                   no
LED support:                   no
IPv6 support:                  no
Cache exchange support:        yes

camd 3.3x:                     no
camd 3.5 UDP:                  yes
camd 3.5 TCP:                  yes
newcamd:                       yes
CCcam:                         yes
CCcam share:                   yes
Pandora:                       yes
ghttp:                         yes
gbox:                          yes
radegast:                      yes
serial:                        yes
constant CW:                   yes

Reader support:                yes

Nagra:                         yes
Irdeto:                        yes
Conax:                         yes
Cryptoworks:                   yes
Seca:                          yes
Viaccess:                      yes
NDS Videoguard:                yes
DRE Crypt:                     yes
TONGFANG:                      yes
Bulcrypt:                      yes
Griffin:                       yes
DGCrypt:                       yes

cardreader_phoenix:            yes
cardreader_internal_azbox:     no
cardreader_internal_coolapi:   no
cardreader_internal_sci:       yes
cardreader_sc8in1:             yes
cardreader_mp35:               yes
cardreader_smargo:             yes
cardreader_pcsc:               yes
cardreader_smartreader:        yes
cardreader_db2com:             yes
cardreader_stapi:              no

[RuBeN]

Re: Oscam Compiled RuBeNi All Patch!!

SH4 binares

[RuBeN]

Re: Oscam Compiled RuBeNi All Patch!!

nuovi bin x86_64

[RuBeN]

Re: Oscam Compiled RuBeNi All Patch!!

non potevo dimenticare le vecchie dm500s ecc ppc

+-------------------------------------------------------------------------------
| OSCam ver: 1.20-modded_svn rev: 261 target: powerpc-linux
| Tools:
|  CROSS    = /opt/simplebuild/toolchains/ppcold/bin/powerpc-linux-
|  CC       = /opt/simplebuild/toolchains/ppcold/bin/powerpc-linux-gcc
| Settings:
|  CONF_DIR = /var/tuxbox/config
|  CC_OPTS  = -Os -ggdb -pipe -ffunction-sections -fdata-sections
|  CC_WARN  = -w
|  CFLAGS   = 
|  LDFLAGS  = -Wl,-rpath,/lib -Wl,-rpath,/usr/local/lib -Wl,-rpath,/usr/lib -L/opt/simplebuild/toolchains/ppcold/lib
|  LIBS     = -lpthread -ldl
|  UseFlags = 
| Config:
|  Addons   : WEBIF TOUCH HAVE_DVBAPI IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK
|  Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX RADEGAST SERIAL CONSTCW PANDORA GHTTP
|  Readers  : NAGRA IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
|  CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO DB2COM STAPI
|  Compiler : powerpc-linux-gcc (GCC) 3.4.4
|  Binary   : ../archiv/oscam-svn261-ppcold-webif-patched
+-------------------------------------------------------------------------------

[RuBeN]

Re: Oscam Compiled RuBeNi All Patch!!

compitato per tutti supporti di boxes.

thank you

[cliff.t]

Re: Oscam Compiled RuBeNi All Patch!!

Vabbe'....allora rilancio......per mips O.E 2.0......supporta protocollo cccam/newcamd cardreaders interni e smartreader....modern webif incorporata ed " all patch ".......


l'avevo compilata per i "miei"......
ciao

p.s: @ Ruben ottimo lavoro......

[RuBeN]

Re: Oscam Compiled RuBeNi All Patch!!

nuovi bin sempre i patch per le nostre carte, meminfo,ecc

[RuBeN]

Re: Oscam Compiled RuBeNi All Patch!!

Nuovi BIN

[RuBeN]

Re: Oscam Compiled RuBeNi All Patch!!

Tested Ok on IPC SERVER !!!

[RuBeN]

Re: Oscam Compiled RuBeNi All Patch!!

Nuovi bin 16.10.2013 ALL PATCH

Perfavore a chi usa DM in internal
provi usare

Mhz = 2700
Cardmhz = -1

Perfavore se qualcosa nn va , Scrivete Qui

http://www.bliner-key.com/oscam/27434-oscam-compiled-rubeni-all-patch.html

[RuBeN]

Re: Oscam Compiled RuBeNi All Patch!!

Altre

[RuBeN]

Re: Oscam Compiled RuBeNi All Patch!!

NUOVI BIN ANCORA ;) 16.10.2013 ALL PATCH

Sono solo Oscam Compilate Con Passione

info http://www.bliner-key.com/oscam/2743...all-patch.html

[RuBeN]

Re: Oscam Compiled RuBeNi All Patch!!

Hi people!
Finally, after 3 months we got a stable HT implementation!
This patch make changes mainly over cache handler, but also add other usefull stuff in oscam.

These are overall changes:

- Cache is now stored in Hash Table! Cpu load dropped!
The "TommyDS" library (TommyDS C Library of Hashtable and Tries) is used for hash tables implementation.
It implments a chained linear hash table, called "tommy_hashlin".
Anyway, it should be tested on different systems.

- Cache is stored in HT using only csp_hash. To match ecm with cws, we use only csp_hash without check on caid/prid/srvid!

- Now, cheking cw in cache is done each 10ms. So, answer from cache could happen at any time, if ecm not answered yet.
By default, each different cw (max 10) for same hash is stored in cache, and only cw with highest counter (that is, most received cw) is served at checking cache.
This help avoid fake cws. Obviously, we should have more than one cacheex peer to let counters increase.
It will works only with cacheex cws, cw from normal reader have priority and are considered good!
To force a specific counter, we can handle it with these new parameters in cache section:
- "check_cw_count" : set minimum cw counter to allow cw is used.
Default=1, use default behaviour: use cw with highest counter when cache is checked.
e.g. check_cw_count=2 -> use cw only if its counter is equal 2 (That is, 2 same cw received)
- "check_cw_count_mode" : specify behaviour for "check_cw_count".
Possible values:
0: when wait_time expires, serve highest counter's cw got anyway, even if no check_cw_count reached.
1: never serve cw (coming from cacheex) stored in cache if its counter not reaches check_cw_count. When wait_time expires, requests will go to normal readers! Only when a cw reaches check_cw_count, it can be served to clients.
Default 0.

- Each different cw is now pushed to cacheex peers only ONE time! No more risk same cw is pushed twice for same client!
Anyway this depends on max_time parameter, because if a cw arrives after its ecm hash is freed from cache, we lost pushing out informations for clients. So, you should set max_time as cw life at least to be sure this works properly.

- CAMD35 and CS378X:
- add keepalive stuff (handled only by reader).
Parameter: "keepalive", 1 to enable it, 0 disabled (default).
When keepalive is used, reconnetiontimeout is set to 60s, because it cannot be checked before keepalive exchange (each 30s).
On server side, the clientmaxidle parameter > 30-40s should be used (deafult is 120s, so can you leave default value). If not, client will close connection and reader will reopen it each 30s.
- fix a bug (existing in svn) reading packets.
- Revisited all packets exchange in cacheex mode 2 and 3.

Compatibility with svn oscam is ok.

- Added in cache and in cacheex protocols(camd35 and cccam) odd/even byte info.
As bowman told me, this will let CSP able to fix problem in 0963, because now oscam send odd/even byte to it.
In fact, in CSP, it's required all cws sent trough UDP port oscam->CSP have this byte set. If not, CSP cannot detect correct cw part to swapp.
So, if you send cache (from cacheex) to CSP, make sure you and all your peers (and peers of yours peers...) run this version, to correctly send 0963 cache to CSP.
Anyway this require a new CSP plugin, that use this new byte for correctly swap cws. Ask to CSP developers fot it.
Atm, commit at #9036 is keeping here, until this patch will be spreaded. After, it could be removed without problems, because now CW swapp for cache is done in cache handler itself, using odd/even byte.

- Fix cacheex mode 2 for camd35.
REAL problem of mode 2 was that without CONNECTED status, clients would not push cws, because starting connection is done by reader and (if cacheex_allow_request=0) it does not send nothing (ecm requests) for initializing connection.
This is reason mode 2 camd35 readers are NOT WORKING CORRECT in svn atm. They receive nothing if NOT connected.
With cccam this is not a problem, because it connects at startup and have keepalive stuff.
For this reason i add "keepalive" parameter in reader section to work with camd35(tcp and udp) readers. It will connect reader at startup and will take connection alive. It works for all camd35(tcp and udp) readers, cacheex and "normal".
Keepalive stuff is mandatory for cacheex mode 2 readers. ("keepalive=1" for camd35, and "ccckeepalive=1" for cccam)
For cacheex (mode 2/3) camd35 (tcp and udp) readers, it is now enabled by default.
Camd35 keepalive send msg and check connection each 30s, and if network failure, it will re-conenct reader.
When used on a cacheex mode 2/3 readers, it will send its nodeid as keepalive msg. So nodeid is updated each 30s. No more request/answer keepalive msgs each 256 cws pushed as svn.
This decrease network traffic and make communication more cleaned.
On server side, the clientmaxidle parameter > 30-40s should be used (deafult is 120s, so can you leave default value). If not, client will close connection and reader will reopen it each 30s.

- To filter incoming and outgoing cache, now we use caid, ident and services parameters.
"cacheex_ecm_filter" is leaved for compatibility with svn oscam. But we can use caid/ident/services now.
Take attention, filters on prid will be ignored for cache coming from csp, because csp cache not send prid information (prid=0 always).

- Added check on block_same_name and block_same_ip to avoid cacheex loopback in cacheex mode 1.

- Added new parameter "no_wait_time" in user section. E.g. If we would a client that ask real readers without wait for cache, we could use this parameter.
This could be also usefull e.g. for cacheex mode 2 client when cacheex_allow_request=1. If client receive ecm request (when cacheex_allow_request=1), it should not wait because no cw was pushed to it and it would search for real readers. But obviously, thid depends from configuration.
Possible values:
0: use wait_time set in cache config
1: no use wait_time
Default 0.


- Added config parameter "reconnectdelay" for max tcp connection block delay, in milliseconds (reader section). Default 60000 ms (1min, as always been in svn)

- check in cache for "oscam.cacheex" file for mode1 readers removed. Miss documentation about it and maybe no one use that file.

- Fix always accept prid=000000 for services. It has to be explicity set.

- added column to show number of requests per minute in webif user page.

- move reader table pending to max 4096. So now you can set -p4096 when start oscam.

- In webif, if one of stats overflow (become negative), reset all stats automatically.

- Try fix some random crashes found in svn too.

- This patch revert CWC Check changes in svn #9037, #9059, #9061, #9062: code changes are not compatible with this new code. New re-code is nedeed.

- ATM, this patch revert changes in svn #9066, #9067, #9070, #9071: See my posts here: Streamboard | Ihnen wird der Zutritt zu dieser Seite verwehrt..


Most of the new parameters are not in the webif (yet), it will be added later by me or by some voluntary Zunge raus


Considerations:
Initially i thinked to remove cacheex mode 3, because now mode 2 works great. But, for compatibility with svn oscam, i leave it in code.
My advise: use cs378x protocol and cacheex mode 2! It is more clean and light. Now cacheex works very well with it!
With this patch, you will see your cache size grown than svn, be quite that all is normal because now oscam process MORE cws per second and cws are taken more time in cache, because free happens at (last cw got time+max_time), while before was (first cw got time+max_time).
Also, you can see now cw diff increases more, it is normal because now each new cw is compared with the heighest "counted" cw, that can be change at each cw arrived.

Special thanks goes to Capncook, support me in development ideas and tests. A lot of nights without sleep! smile
Also thanks to Gorgone, Mo0211 and mumbua, helped me a lot with tests.



This is an example how reader and client could be configured for cacheex mode 2 communication:

***** CACHEEX MODE 2 ******
Reader receive cws (and if cacheex_allow_ecm_request=1 send ecm requests too):

[reader]
label                         = 
protocol                      = 
device                        = 
user                          = 
password                      = 
group                         = 
keepalive		      = 1  //if camd35/cs378x it is useless, because is enabled by deafult. For cccam,use ccckeepalive=1.
cacheex                       = 2
cacheex_allow_request         =    //allow send ecm requests (default=1, as svn)
#####cacheex incoming filter#####
cacheex_maxhop                =    //max incoming cw hop (default=10, as svn)
cacheex_drop_csp              =    //drop incooming cache from csp (deafult=0, as svn)
caid			      =    //incoming caid filter (default all)
ident			      =    //incoming ident filter (default all)
services		      =    //incoming services filter (default all). Take attention: if we have too much sids to check, incoming push could slowly!


User send cws (and if cacheex_allow_ecm_request=1, answer to ecm requests too):

[account]
user                          = 
pwd                           = 
group                         = 
no_wait_time		      =    //ignore wait_time at incoming ecm request (it works for not cacheex users too)
cacheex                       = 2
cacheex_allow_request	      =    //allow incoming ecm requests (default=1, as svn)
#####cacheex outgoing filter#####
cacheex_maxhop                =    //max outgoing cw hop (default=10, as svn)
cacheex_drop_csp              =    //not send cache recived from csp (deafult=0, as svn)
caid			      =    //outgoing caid filter (default all)
ident			      =    //outgoing ident filter (default all)
services		      =    //outgoing services filter (default all). Take attention: if we have too much sids to check, outgoing push could slowly!

root@ruben-debian /opt/simplebuild/oscam-svn > patch -p0 < blueven_cache_V1.0_svn9071.modern.patch
patching file globals.h
Hunk #8 succeeded at 1410 (offset 1 line).
Hunk #9 succeeded at 1474 (offset 1 line).
Hunk #10 succeeded at 1561 (offset 1 line).
Hunk #11 succeeded at 1771 (offset -1 lines).
Hunk #12 succeeded at 1790 (offset -1 lines).
Hunk #13 succeeded at 1867 (offset -1 lines).
patching file Makefile
patching file module-cacheex.c
patching file module-cacheex.h
patching file module-camd35.c
patching file module-cccam.c
patching file module-csp.c
patching file module-cw-cycle-check.c
patching file module-cw-cycle-check.h
patching file module-gbox.c
patching file module-stat.c
patching file oscam.c
patching file oscam-cache.c
patching file oscam-cache.h
patching file oscam-chk.c
patching file oscam-chk.h
patching file oscam-client.c
patching file oscam-config-account.c
patching file oscam-config-global.c
patching file oscam-config-reader.c
Hunk #1 succeeded at 916 (offset 31 lines).
Hunk #2 succeeded at 969 (offset 31 lines).
Hunk #3 succeeded at 1218 (offset 31 lines).
patching file oscam-ecm.c
patching file oscam-ecm.h
patching file oscam-garbage.c
patching file oscam-hashtable.c
patching file oscam-hashtable.h
patching file oscam-llist.c
patching file oscam-llist.h
patching file oscam-reader.c
Hunk #2 succeeded at 89 (offset 4 lines).
Hunk #3 succeeded at 671 (offset 19 lines).
Hunk #4 succeeded at 1011 (offset 19 lines).
patching file oscam-work.c
patching file tommyDS_hashlin/tommychain.h
patching file tommyDS_hashlin/tommyhash.c
patching file tommyDS_hashlin/tommyhash.h
patching file tommyDS_hashlin/tommyhashlin.c
patching file tommyDS_hashlin/tommyhashlin.h
patching file tommyDS_hashlin/tommylist.c
patching file tommyDS_hashlin/tommylist.h
patching file tommyDS_hashlin/tommytypes.h
patching file webif/cacheex/cacheex_tablerow.html
patching file webif/userconfig/userconfig.html
patching file webif/userconfig/userconfig_entry.html
patching file webif/cacheex/cacheex.html
patching file webif/config/cache_cwcycle.html
patching file webif/include/css.css
patching file module-webif.c
Hunk #3 succeeded at 2914 (offset -3 lines).
Hunk #4 succeeded at 3061 (offset -3 lines).
Hunk #5 succeeded at 3085 (offset -3 lines).
Hunk #6 succeeded at 3114 (offset -3 lines).
Hunk #7 succeeded at 3123 (offset -3 lines).
Hunk #8 succeeded at 3174 (offset -3 lines).
Hunk #9 succeeded at 3228 (offset -3 lines).
Hunk #10 succeeded at 3826 (offset -3 lines).
Hunk #11 succeeded at 4078 (offset -3 lines).
Hunk #12 succeeded at 4108 (offset -3 lines).
Hunk #13 succeeded at 5793 (offset -3 lines).
Hunk #14 succeeded at 5810 (offset -3 lines).
Hunk #15 succeeded at 5833 (offset -3 lines).
Hunk #16 succeeded at 5893 (offset -3 lines).

[RuBeN]

Re: Oscam Compiled RuBeNi All Patch!!

oscam






Oscam Work perfect on CPU and CacheEX 1,2,3 on vu plus. and debian server.

sorry my time to upload files on all boards. i dont have a lots time.
my external link is not a spam (just is my space,so is mine my work etc.)
so if you dont like.dellete or remove dhis post.

please to all. update dhis version of oscam. is a very good CPU,and CacheEX 1,2,3.

for download on my personal web space

http://www.bliner-key.com/update/index.php?dir=OSCAM/23.12.2013/

2013/12/23 19:15:32 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:F30030EE408856400B1C3F08911B036F): cache3 (152 ms) by rubeni - Cinema +1 
2013/12/23 19:15:42 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:0368B90606D2939BE8D2047DCFE360E2): cache3 (140 ms) by rubeni - Cinema +1 
2013/12/23 19:15:52 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:BEAB7030E8707E9F4324C51175501D11): cache3 (156 ms) by rubeni - Cinema +1 
2013/12/23 19:16:02 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:DCB8C1C8449E41FA4FA6F7B4BD0BAC03): cache3 (142 ms) by rubeni - Cinema +1 
2013/12/23 19:16:12 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:0200C9E22059D08F9C9B60EF6AAFD2C8): cache3 (142 ms) by rubeni - Cinema +1 
2013/12/23 19:16:22 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:F3C40A58D02A14733A552EA0113C5FA4): cache3 (158 ms) by rubeni - Cinema +1 
2013/12/23 19:16:32 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:9738C1FD146FDA1EA9A0E6C8F6B6A976): cache3 (144 ms) by rubeni - Cinema +1 
2013/12/23 19:16:42 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:DCD958F600B96BE9B171274983A4A1C7): cache3 (142 ms) by rubeni - Cinema +1 
2013/12/23 19:16:52 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:002090D3B59E8868238FDB4953E76D27): cache3 (144 ms) by rubeni - Cinema +1 
2013/12/23 19:17:02 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:35CBE3A1986AD3813B0F16A75DCE7A42): cache3 (145 ms) by rubeni - Cinema +1 
2013/12/23 19:17:12 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:6ECB452F49ACE2752A77A4F5CA6C3E8E): cache3 (135 ms) by rubeni - Cinema +1 
2013/12/23 19:17:22 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:A5CA7FE4F348F36A02EF73E410CB2306): cache3 (138 ms) by rubeni - Cinema +1 
2013/12/23 19:17:32 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:858370EB444D9AF6C31ADE49A573DA30): cache3 (156 ms) by rubeni - Cinema +1 
2013/12/23 19:17:42 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:D8447D612309BDCFFBBDA8CA6804EEBD): cache3 (143 ms) by rubeni - Cinema +1 
2013/12/23 19:17:52 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:F5A1CE8ECD645019687AAFA0A40AEA3F): cache3 (144 ms) by rubeni - Cinema +1 
2013/12/23 19:18:02 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:5E4825BFC4E9B27FE875BB6C852155C9): cache3 (138 ms) by rubeni - Cinema +1 
2013/12/23 19:18:12 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:4AB9436DB49647F0E99D42BDFE739C08): cache3 (135 ms) by rubeni - Cinema +1 
2013/12/23 19:18:22 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:9A829B81C0D6EB37902097F05EF1C59D): cache3 (140 ms) by rubeni - Cinema +1 
2013/12/23 19:18:32 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:DD3CF1E39C73EAAEF6573E33510542F9): cache3 (145 ms) by rubeni - Cinema +1 
2013/12/23 19:18:42 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:96B078DD6E8C18524FD1FD470AFCDC0A): cache3 (137 ms) by rubeni - Cinema +1 
2013/12/23 19:18:52 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:0BFD5353664DF458B39BDB6122A60315): cache3 (144 ms) by rubeni - Cinema +1 
2013/12/23 19:19:02 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:DA84E8AC12EBA6F85EEC15834758820A): cache3 (148 ms) by rubeni - Cinema +1 
2013/12/23 19:19:12 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:C6C75FE27D5CED017EE8071216004A22): cache3 (136 ms) by rubeni - Cinema +1 
2013/12/23 19:19:22 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:476EBD245BC2F374E4BBAFBBB239CE88): cache3 (130 ms) by rubeni - Cinema +1 
2013/12/23 19:19:32 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:08AAB23B7919BF94FB1EBAAB9B198D4B): cache3 (149 ms) by rubeni - Cinema +1 
2013/12/23 19:19:42 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:C57F2142CE0713C42FC36180004FC7E3): cache3 (140 ms) by rubeni - Cinema +1 
2013/12/23 19:19:52 5356D0 c dvbapi (09CD&000000/06BA/2DCA/B7:AE35EA31F4977CB9AE9ECF128C7E815F): cache3 (137 ms) by rubeni - Cinema +1

[RuBeN]

Re: Oscam Compiled RuBeNi All Patch!!

Oscam Original by Modern trunk
Modern Trunk Include lost path so i dont used.

pls use

[webif]
httpshowmeminfo               = 1
httpshowuserinfo              = 1
httpshowcacheexinfo           = 1
httpshowecminfo               = 1
httpshowloadinfo              = 1

Download

http://www.bliner-key.com/update/index.php?dir=OSCAM/24.01.2014/