Oscam + Raspberry + smargo ....Aiuto.

[agnagna]

Ciao, sto smanettando con un Raspberry e smargo x la prima volta...
dopo avere installato tutto l'occorrente (almeno penso), non riesco a leggere le card (diritti).
log test card jsc:
[reader]
label = jsc_test
protocol = smargo
device = /dev/ttyUSB0
autospeed = 1
caid = 0500
detect = cd
mhz = 480
cardmhz = 369
ident = 0500:042400;0500:042410
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1

2014/02/07 17:41:58 0 s >> OSCam << cardserver started, version 1.20-RuBeNi_Modd, build r656 (arm-bcm2708hardfp-linux-gnueabi-libusb-pcsc)
2014/02/07 17:41:58 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 5229
2014/02/07 17:41:58 0 s services reloaded: 0 services freed, 26 services loaded, rejected 0
2014/02/07 17:41:58 0 s userdb reloaded: 32 accounts loaded, 7 expired, 6 disabled
2014/02/07 17:41:58 0 s signal handling initialized
2014/02/07 17:41:58 0 s 1819 service-id's loaded in 22ms
2014/02/07 17:41:58 0 s 1000 provid's loaded
2014/02/07 17:41:58 0 s cccam: initialized (fd=5, port=18987)
2014/02/07 17:41:58 0 s jsc_test [smargo] creating thread for device /dev/ttyUSB0
2014/02/07 17:41:58 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/02/07 17:41:58 0 s waiting for local card init
2014/02/07 17:41:58 576660 r jsc_test [smargo] smargo init type is smargo
2014/02/07 17:41:58 5BC5A0 h webif: decompressed 69915 bytes back into 194300 bytes
2014/02/07 17:41:58 5BC5A0 h HTTP Server running. ip=0.0.0.0 port=8888
2014/02/07 17:41:58 576660 r jsc_test [smargo] clocking for smartreader with smartreader protocol
2014/02/07 17:41:58 576660 r jsc_test [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cts, mhz= AUTO, cardmhz=369)
2014/02/07 17:41:59 576660 r jsc_test [smargo] card detected
2014/02/07 17:42:03 576660 r jsc_test [smargo] ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
2014/02/07 17:42:03 576660 r jsc_test [smargo] Warning: D=0 is invalid, forcing D=1
2014/02/07 17:42:03 576660 r jsc_test [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0
2014/02/07 17:42:03 576660 r jsc_test [smargo] Calculated work ETU is 69.66 us reader mhz = 534
2014/02/07 17:42:03 576660 r jsc_test [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
2014/02/07 17:42:04 576660 r jsc_test [smargo] card system not supported
2014/02/07 17:42:04 576660 r jsc_test [smargo] Normal mode failed, reverting to Deprecated Mode
2014/02/07 17:42:08 576660 r jsc_test [smargo] ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
2014/02/07 17:42:08 576660 r jsc_test [smargo] Warning: D=0 is invalid, forcing D=1
2014/02/07 17:42:08 576660 r jsc_test [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0
2014/02/07 17:42:08 576660 r jsc_test [smargo] Calculated work ETU is 69.66 us reader mhz = 534
2014/02/07 17:42:09 576660 r jsc_test [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
2014/02/07 17:42:10 576660 r jsc_test [smargo] card system not supported
2014/02/07 17:42:10 576660 r jsc_test [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/02/07 17:42:10 576660 r jsc_test [smargo] card initializing error
2014/02/07 17:42:10 0 s init for all local cards done
2014/02/07 17:42:10 0 s anti cascading disabled
2014/02/07 17:42:10 5C0CE8 c plain dvbapi-client granted (dvbapi, au=off)
2014/02/07 17:42:10 5C0CE8 c ERROR: Could not detect DVBAPI version.

[CiCLoPe]

Re: Oscam + Raspberry + smargo ....Aiuto.

non sono sicuro...ma prova ad mettere il smargo in AUTO...cioe si cerca lui la frequanza giusta...

che smargo hai



Maxdigital??...op un clone...essistono progr. per windows...incui puoi mettere i settagi per il smatgo...e dopo lo rimetti di nuovo nel raspberri PI..(ottima robba ;-))

vedendo il LOG vede l'atr....ma mi sembra la velocita non ci piace.......


hai preso una oscam per la tua rasberry???

[agnagna]

Re: Oscam + Raspberry + smargo ....Aiuto.

Argolis smargo.
Dovrebbe gia' essere su auto.
Oscam Ruben modded...
Una config funzionante?

[CiCLoPe]

Re: Oscam + Raspberry + smargo ....Aiuto.

se togli la mhz ??

prova all'inizio un puo di non fare overclocking...cioe con 357MhZ....per MHZ e cardMHZ





hai una versione speciale per rasberry???

[menelao]

Re: Oscam + Raspberry + smargo ....Aiuto.

non capisco cosa centrano i diritti visto che la oscam si pianta ......

2014/02/07 17:42:10 5C0CE8 c ERROR: Could not detect DVBAPI version.

oscam è stata compilata con il modulo dvbapi attivo, quindi in fase di avvio va a cercare il pid-ecm che ovviamente non trova in quando il Rb non ha il tuner on board ..... va ricompilata senza modulo dvbapi.

saluti

[agnagna]

Re: Oscam + Raspberry + smargo ....Aiuto.

anche senza dvbapi....

2014/02/08 13:53:25 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9462 (arm-linux-gnueabihf)
2014/02/08 13:53:25 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3490
2014/02/08 13:53:25 0 s services reloaded: 0 services freed, 26 services loaded, rejected 0
2014/02/08 13:53:25 0 s userdb reloaded: 32 accounts loaded, 7 expired, 6 disabled
2014/02/08 13:53:25 0 s signal handling initialized
2014/02/08 13:53:25 0 s 1819 service-id's loaded in 19ms
2014/02/08 13:53:25 0 s 1000 provid's loaded
2014/02/08 13:53:25 0 s cccam: initialized (fd=5, port=*******)
2014/02/08 13:53:25 0 s jsc_test [smargo] creating thread for device /dev/ttyUSB0
2014/02/08 13:53:25 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/02/08 13:53:25 0 s waiting for local card init
2014/02/08 13:53:25 101BE00 r jsc_test [smargo] smargo init type is smargo
2014/02/08 13:53:25 10A9598 h webif: decompressed 65909 bytes back into 192472 bytes
2014/02/08 13:53:25 10A9598 h HTTP Server running. ip=0.0.0.0 port=8888
2014/02/08 13:53:25 101BE00 r jsc_test [smargo] clocking for smartreader with smartreader protocol
2014/02/08 13:53:25 101BE00 r jsc_test [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cts, mhz=369, cardmhz=369)
2014/02/08 13:53:26 101BE00 r jsc_test [smargo] card detected
2014/02/08 13:53:31 101BE00 r jsc_test [smargo] ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
2014/02/08 13:53:31 101BE00 r jsc_test [smargo] Warning: D=0 is invalid, forcing D=1
2014/02/08 13:53:31 101BE00 r jsc_test [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0
2014/02/08 13:53:31 101BE00 r jsc_test [smargo] Calculated work ETU is 100.81 us reader mhz = 369
2014/02/08 13:53:31 101BE00 r jsc_test [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2014/02/08 13:53:32 101BE00 r jsc_test [smargo] card system not supported
2014/02/08 13:53:32 101BE00 r jsc_test [smargo] Normal mode failed, reverting to Deprecated Mode
2014/02/08 13:53:36 101BE00 r jsc_test [smargo] ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
2014/02/08 13:53:36 101BE00 r jsc_test [smargo] Warning: D=0 is invalid, forcing D=1
2014/02/08 13:53:36 101BE00 r jsc_test [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0
2014/02/08 13:53:36 101BE00 r jsc_test [smargo] Calculated work ETU is 100.81 us reader mhz = 369
2014/02/08 13:53:36 101BE00 r jsc_test [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2014/02/08 13:53:37 101BE00 r jsc_test [smargo] card system not supported
2014/02/08 13:53:37 101BE00 r jsc_test [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/02/08 13:53:37 101BE00 r jsc_test [smargo] card initializing error
2014/02/08 13:53:38 0 s init for all local cards done
2014/02/08 13:53:38 0 s anti cascading disabled

dove è l'inghippo?
Grazie....

[CiCLoPe]

Re: Oscam + Raspberry + smargo ....Aiuto.

io quando ho...card system not supported....ho fatto un paio di restart del reader stesso nel webif...fino che parte......hai provato a metterlo in 3,57MhZ


il 369Mhz nel smargo penso se riccordo bene...si deve settare tramite il PC


prova cosi con il smargo

Mode = Autoswitch
Kernel=Dreambox
T-mode= T=1 ( prova pure con T=0 se non funzia)
EGT = 0





INFo

T-mode stands for transmission protocol. I.o.w. the way the decive 'talks' to a smartcard.
In short it comes down to this:
T=0 -> character protocol
T=1 -> block protocol

Different cards require a different way of communication. Without getting all to technical it basically comes down to this:
seca, conax, cr*ptoworks, n*s, viaccess -> T=0
Irdeto (b*tacr*pt, Nagra? Haven't tested) -> T=1

Parity is also of importance (parity tag in newcs.xml):
seca, conax, c*y*toworks = even
nds, viaccess = odd
irdeto = doesn't matter much (because T=1)

[agnagna]

Re: Oscam + Raspberry + smargo ....Aiuto.

io quando ho...card system not supported....ho fatto un paio di restart del reader stesso nel webif...fino che parte......hai provato a metterlo in 3,57MhZ


il 369Mhz nel smargo penso se riccordo bene...si deve settare tramite il PC


prova cosi con il smargo

Mode = Autoswitch
Kernel=Dreambox
T-mode= T=1 ( prova pure con T=0 se non funzia)
EGT = 0





INFo

T-mode stands for transmission protocol. I.o.w. the way the decive 'talks' to a smartcard.
In short it comes down to this:
T=0 -> character protocol
T=1 -> block protocol

Different cards require a different way of communication. Without getting all to technical it basically comes down to this:
seca, conax, cr*ptoworks, n*s, viaccess -> T=0
Irdeto (b*tacr*pt, Nagra? Haven't tested) -> T=1

Parity is also of importance (parity tag in newcs.xml):
seca, conax, c*y*toworks = even
nds, viaccess = odd
irdeto = doesn't matter much (because T=1)

il 369 se lo setta in automatico anche se metto 357 mhz e 357 cardmhz.
dmesg:
[ 412.772122] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 412.772714] usb 1-1.2: Detected FT232BM
[ 412.772748] usb 1-1.2: Number of endpoints 2
[ 412.772766] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 412.772787] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 412.772804] usb 1-1.2: Setting MaxPacketSize 64
[ 412.773458] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[ 412.775031] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 455.075285] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 457.033064] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 458.994321] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 460.955605] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 463.417236] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 465.374949] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 467.336443] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 469.297714] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 471.759236] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 473.716697] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 475.678359] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 477.639857] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 836.221791] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 838.179573] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 840.166105] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 840.471305] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 841.778382] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 843.242038] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 845.221264] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 845.523841] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 892.242082] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 894.199824] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 896.186196] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 896.491072] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 897.797370] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 899.258042] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 901.239323] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 901.543187] ftdi_sio ttyUSB0: requested CSIZE setting not supported

aiuto......

[menelao]

Re: Oscam + Raspberry + smargo ....Aiuto.

elimina il parametro mhz e abilita autospeed

[reader]
label = jsc_test
protocol = smargo
device = /dev/ttyUSB0
autospeed = 1
caid = 0500
detect = cd
autospeed= 1
cardmhz = 369
ident = 0500:042400;0500:042410
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1

[agnagna]

Re: Oscam + Raspberry + smargo ....Aiuto.

Risolto così:
protocol = smartreader
device = 001:004

Tnx.